Electronic power starter (EPS) is intended for switching ON/OFF of voltage in high-current circuits:
- EPS-1 for single-phase loads;
- EPS-2 for three-phase loads.
![](http://new.yetri.am/wp-content/uploads/2019/02/el-power.jpg)
It’s contactless and nonsparking starter, that increases reliability and durability and decreases fire danger, noises and radio-interference.
SPECIFICATIONS
Operation voltage | 200…240 V |
Max.load current EPS-1 | 25 A |
Max. load current EPS-3 for each phase | 40 A |
Turn-on time | 10 ms |
Max. voltage of isolation, no more than | 1000 V |
Temperature regulation range | 100…900C |
Temperature setting accuracy | ±50C |
Weight | |
EPS-1 | 0,5 kg |
EPS-3 | 1,1 kg |
Dimensions | |
EPS-1 | 160x80x80 mm |
EPS-3 | 195x100x100 mm |
ELECTRONIC POWER STARTER