The regulator provides:

• smooth switch ON/OFF of illuminators by hand touch or remote control;
• smooth regulation of brightness, that gives the opportunity to choose the lighting of room, which are necessary;
• storage of set brightness level;
• imitation of people presence at room;
• extension of the operation life of illuminators;
• energy saving;
• convenience at operation. 

Using the remote control, you should not get up from bed  to switch off light.

Commands of hand control are:

• one touch — switching on;
• two touches — choice of the channel;
• three touches — maximum brightness;
• four touches — switching off;
• five touches — mode of imitation of the people presence;
• delay of hand on the case — brightness control.

Max. power of load	800W
Protection class of electrical shock	II
Corrected level of sound power	35dBA

Electronic power starter (EPS) is intended for switching ON/OFF of voltage in high-current circuits:

• EPS-1 for single-phase loads;
• EPS-2 for three-phase loads.  

It’s contactless and nonsparking starter, that increases reliability and durability and decreases fire danger, noises and radio-interference.

SPECIFICATIONS

Operation voltage	200…240 V
Max.load current EPS-1	25 A
Max. load current EPS-3 for each phase	40 A
Turn-on time	10 ms
Max. voltage of isolation, no more than	1000 V
Temperature regulation range	100…900C
Temperature setting accuracy	±50C
Weight
EPS-1	0,5 kg
EPS-3	1,1 kg
Dimensions
EPS-1	160x80x80 mm
EPS-3	195x100x100 mm

The photorelay is intended for automatic insertion and cutout of illuminators depends on lighting.

 

SPECIFICATION

AC supply voltage	220V
MAx. power commutation	100W
Dimensions	100x60x40mm

The timer is made on basis of electromechanical clock. it is made on base of electromechanical clock and provides automatic switching off at given time.

AC Supply voltage	220V
Max. delay time	11 hours
Max.power commutation	1500W
Dimensions	110x90x70

The light’s auto-cutout is intended for switching ON and auto-cutout of illuminators in rooms where  lighting is not necessary: entrances, holding allays and barns of apartments and offices.

The auto cutout is carried out after definitive time, which will be given on the customer’s request.

Using of auto cutout allows to decrease annual power consumption of one holding allay of the five-storey house on 2000 kW/h and increase life time of illuminators in 6 times.

Number of switches is unlimited.

SPECIFICATIONS

Supply voltage	190…250V
Max.power commutation	150W
Power consumption, no more than	1W
Max. delay time	5min
Weight	220g
Dimensions	120x85x70mm